Integrated 10.24kWh LiFePO4 Battery with ET10 Expansion
The Fox ESS Avocado P100E-10-H includes a nominal 10.24kWh lithium iron phosphate battery, providing an integrated storage solution for residential solar self-consumption and supported backup applications.
The manufacturer specifies a depth of discharge of 95%. Actual usable energy depends on the system settings, operating conditions and conversion losses.
Unlike the earlier Avocado P100 configuration, the P100E supports additional DC battery expansion through compatible Fox ESS ET10 units.
| Battery configuration | Total nominal capacity |
|---|
| P100E-10-H integrated battery | 10.24 kWh |
| P100E + 1 ET10 | 20.48 kWh |
| P100E + 2 ET10 | 30.72 kWh |
| P100E + 3 ET10 | 40.96 kWh |
Expansion batteries are supplied separately and require approved electrical connections, battery communication and commissioning.
This makes the P100E-10-H suitable for projects where storage capacity may need to increase without immediately replacing the hybrid inverter.
For alternative storage architectures, explore the solar batteries and battery energy storage systems at 3Buy Solar.
Integrated 10kVA EPS Backup – Installation Requirements
The Fox ESS P100E-10-H includes a dedicated single-phase EPS output rated at 10,000VA, with a manufacturer-specified switching time below 4ms.
The integrated backup connection enables appropriately configured emergency power circuits. The manufacturer does not specify a separate proprietary Fox ESS backup box as mandatory for dedicated EPS circuits.
However, whole-house backup requires a separate electrical design assessment. Depending on the installation, an external transfer arrangement, backup contactor, distribution-board modification or additional protective equipment may be required.
Installers must evaluate:
- Connected backup loads and simultaneous power demand.
- Motor starting currents and other short-duration loads.
- Appropriate grid isolation and switching arrangements.
- Neutral and earthing requirements.
- Circuit protection and permitted EPS wiring configurations.
The P100E-10-H provides single-phase backup, not independent three-phase emergency power.
FoxCloud 2.0 Monitoring and Energy Management
The Avocado P100E-10-H supports FoxCloud 2.0, giving installers and system owners access to supported monitoring functions for solar electricity production, battery operation and energy consumption.
The system provides communication interfaces including Ethernet, WiFi, LAN and Bluetooth, with optional 4G connectivity.
System monitoring can assist with commissioning, operational checks, performance evaluation and ongoing maintenance.
For installation guidance and wider professional learning resources, visit the 3Buy Solar Installer Training Centre.
IP66 Protection and Integrated Installation Design
The Fox ESS P100E-10-H combines its hybrid inverter, lithium battery and associated control equipment within a single enclosure.
This architecture reduces the number of separately housed major components and simplifies the process of selecting a coordinated inverter and battery configuration.
The system features:
- IP66 ingress protection.
- Floor-mounted or wall-mounted installation options.
- Intelligent air cooling.
- Operating temperature range from -20°C to +55°C, subject to performance limitations.
- Enclosure dimensions of 584 × 1009 × 197mm.
- Total unit weight of 108kg.
Suitable mechanical support, safe lifting procedures, ventilation clearances and manufacturer-approved installation arrangements remain essential.
Professional installation is required. Appropriate electrical protection, metering, grid settings, system configuration and commissioning must follow the current Fox ESS P100E installation documentation.
Fox ESS P100E vs Conventional Hybrid Inverter and Battery Systems
The Avocado P100E-10-H provides an alternative to purchasing a separate hybrid solar inverter and compatible battery storage system.
For an integrated installation, the principal benefits are coordinated inverter-battery operation, fewer independent major equipment enclosures and a defined manufacturer-supported expansion architecture.
Conventional systems may offer more flexibility in selecting individual inverter ratings, battery manufacturers or installation locations.
Installers comparing these approaches can explore the 3Buy Solar hybrid inverter range and our complete energy storage kits with inverter.
The P100E must also be distinguished from the earlier P100 generation. Our Fox ESS Avocado P100 technical review covers the earlier series, whose specifications and expansion arrangements should not automatically be applied to P100E models.
Applications for Professional Solar Installers
The Fox ESS Avocado P100E-10-H is suitable for consideration in:
- Residential PV installations requiring 10kW single-phase inverter output.
- New solar panel systems with integrated battery energy storage.
- Higher-consumption homes with suitable single-phase grid connections.
- Projects requiring three independent PV string trackers.
- Residential solar self-consumption and electricity storage.
- Installations with designated emergency backup circuits.
- Projects requiring future battery expansion to 20.48kWh, 30.72kWh or 40.96kWh nominal capacity.
System selection must take account of the property’s electrical connection, permitted grid export power, anticipated load demand, PV array design and applicable country-specific requirements.
For additional procurement criteria and alternative battery technologies, read the 3Buy Solar Battery Comparison 2026 – 59 Home Energy Storage Systems Compared.
Fox ESS Avocado P100E-10-H – European B2B Procurement
The P100E-10-H is designed for professional solar PV projects where an integrated inverter and battery configuration can simplify equipment selection while retaining the option for future energy storage expansion.
For installers, EPC contractors and resellers, procurement should be based on the exact P100E-10-H model, compatible accessories, required battery expansion, national grid approvals and the complete installation specification.
Explore the Fox ESS battery and inverter range at 3Buy Solar for related solutions.
For bulk procurement, project quantities, destination-specific supply requirements or a tailored commercial offer, contact 3Buy Solar with your required equipment configuration.
Reviews
Clear filtersThere are no reviews yet.